New products

» Do not allow new products at this time.

Cart  

No products

$0.00 Shipping
$0.00 Total

Cart Checkout

PROJECT RPM 9.2 EVOLUTION Maximize

PROJECT RPM 9.2 EVOLUTION

Turntable  

• Chassis and motor housing piano-lacquered dark grey  

• A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.  

• The medium density fibre plinth rests on three individually height-adjustable magnetic field feet.  

• A supplied spirit level allows easy adjustment. Granulate filled plinth guarantees constant damping.  

• The motor is mounted in a separate metal housing to eliminate vibration transmission.  

• The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 3,5Kg and a brass record puck.  

• The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.  

• Central metal block optimises centre of gravity and damps main bearing.  

• Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.  

• External power supply avoids potential electro-mechanical interference.  

More details

$2,233.00

Reduced price!

-$266.00

$2,499.00

Add to cart

Tonearm Pro-Ject 9cc Evolution  

• The headshell and armtube are fashioned from a single piece of carbon-fibre.  

• Conical armtube avoids standing wave reflections.  

• Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.  

• Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances.  

• Sorbothane®-damped counterweight effectively counteracts unwanted resonances.  

• The counterweights supplied are suitable for cartridges weighing between 5 - 7,5g, 7 - 10g, 9 - 11g or 10 - 14g  

• Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.  

• Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).  

• Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.  

• Silicone-damped armlift can be adjusted to suit working height of the arm.  

• The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets. 

 

TECHNICAL DATA

PRO-JECT RPM 9.2 EVOLUTION

Nominal speeds 33 / 45 r.p.m.
Dust cover Pro-Ject Cover it optional
Record weight yes
Motor in separate housing yes
RCA phono sockets yes
Magnet supported feet yes
Central metal block yes
Tonearm Pro-Ject 9cc Evolution
Carbon-fibre headshell and armtube yes
Effective tonearm length 9" (230mm)
Effective tonearm mass 8g
Overhang 18mm
Supplied counterweight cartridge weight 5 - 7.5g, 7 - 10g, 9 - 11g, 10 - 14g
Downforce range 10 - 35mN
Speed variance ±0,5 %
Wow and flutter ±0,06 %
Signal to noise -73dB
Platter weight/diameter 3,5kg/300mm
Power supply type Mains-fed outboard power supply
  220 - 240V, 50 cycles or 100 - 110V, 60 cycles
Output voltage 16V/500mA AC
Power consumption 2W
Dimensions 440 x 180 x 325mm
Weight 10,5kg + motor unit 2kg

No customer comments for the moment.

Write your review

PROJECT RPM 9.2 EVOLUTION

PROJECT RPM 9.2 EVOLUTION

Turntable  

• Chassis and motor housing piano-lacquered dark grey  

• A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.  

• The medium density fibre plinth rests on three individually height-adjustable magnetic field feet.  

• A supplied spirit level allows easy adjustment. Granulate filled plinth guarantees constant damping.  

• The motor is mounted in a separate metal housing to eliminate vibration transmission.  

• The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 3,5Kg and a brass record puck.  

• The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.  

• Central metal block optimises centre of gravity and damps main bearing.  

• Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.  

• External power supply avoids potential electro-mechanical interference.  

Write your review

Manufacturers

Newsletter