Isotek Power Conditioner and Filter

The EVO3 Nova One is an evolution on from the original GII  Nova but features a dramatically modified and improved clean power  network, and is positioned specifically for source components that use  less power. Greater emphasis has been placed upon high-frequency  filtering, and a nine section circuit consisting of both series and  parallel filters dramatically removes both Common Mode and Differential  Mode power line noise.

The EVO3 Nova is a state of the art passive power cleaning  system incorporating full DC cancellation. The system offers 12  independently filtered power outlets, eight rated at 10A and four rated  at 16A, these designed for high current electronics, for example power  amplifiers, active loudspeakers or subwoofers. These also feature a  slightly paired down version of the Titan’s unique Direct-Coupled©  circuit. Nova is a fully system solution, full system upgrade  incorporating 12 independent filter networks, each supporting its own  output socket.

Syncro Uni incorporates unique DC-cancelling electronics that  rebalance the mains sine wave to dramatically reduce/silence  transformer hum. This sophisticated product can be used independently  for a single component, or in combination with another IsoTek power  cleaner as an upgrade and to deliver a fully rebalanced sine wave across  all output sockets.

SMART Power

Power cleaning with full programmability

IsoTek SMART Power combines the company’s power cleaning know-how with full programmability. Three models, Alpha, Delta and Theta offer custom installers power management and safety control through RS232, LAN and over WiFi through a secure online interface and dedicated codex for Control 4 and Crestron.

SMART Power

Power cleaning with full programmability

IsoTek SMART Power combines the company’s power cleaning know-how with full programmability. Three models, Alpha, Delta and Theta offer custom installers power management and safety control through RS232, LAN and over WiFi through a secure online interface and dedicated codex for Control 4 and Crestron.

SMART Power

Power cleaning with full programmability

IsoTek SMART Power combines the company’s power cleaning know-how with full programmability. Three models, Alpha, Delta and Theta offer custom installers power management and safety control through RS232, LAN and over WiFi through a secure online interface and dedicated codex for Control 4 and Crestron.

Gigawatt POWERPRIME is the first model from a new family of conditioners, which sets trends for future project concepts that will be gradually initiated in our following products.

POWERPRIME provides effective surge protection, and at the same time supplies the devices with clean, well-filtered energy. That makes it an essential part of every modern audio/video system.

The PF-1e is a simplified, economical version of the PF-1 MK2 power strip. Keeping a similar architecture of the main filter allowed for the same level of protection to the connected devices, while savings in used components lowered its price significantly. Nevertheless the PF-1e is a brilliant device, which will prove itself in each – even very advanced audio-video system.

Designing the PF-1e we resigned from the most expensive components. This does not mean, that we used lower quality items or lowered the level of guaranteed safety. The architecture of the main anti-interference filter and the overvoltage protection remained unchanged compared to the PF-1 MK2 strip. Interference is blocked by a RLC filter block.

The new addition to the Ultimate Series, Super Nova is the most sophisticated (passive) front-end source component power cleaning system IsoTek has developed so far.  Unlike some power clean concepts Super Nova not only adjusts to the connected load, it creates the ultimate barrier to differential mode noise cross-contamination but also has the virtue of high transient power handling ability should it be required.

Michael Yee’s continued research into power supply designs has resulted in our Linear Charging Power Supply (LCPS). It was originally designed as a “no holds barred” power supply for charging the battery packs of our flagship Super Nova III phono stage.

There is more instant on tap power due to an increased 35% circuit board copper loading, direct current resistance is at least 25% improved moving closer to the ideal of zero Ohms. Protection is also raised to 81,000A instantaneous. This six-way mains power-cleaning unit resents the market standard. Two high-current outlets are provided for amplifiers, subwoofers and so on, with four medium-current sockets for other components. Each outlet of Aquarius has its own dedicated power-cleaning network, thus six power cleaners in one box!

The resolution, textures, transparency and expression of sound is greatly affected by how and what power is supplied to your audio devices. Which means a power supply unit affects the sound quality to the entire audio system, and should never be considered “just a power supply unit.”

The sPS-500 is an audio power supply designed specifically for high performance audio. It is built to eliminate noise generated by powered devices as well as to remove noise coming from an AC power source.

Siltech’s Royal Signature series power block has eight precision AC mains outlets, plus a high current input socket.

Siltech’s Royal Signature series power block has eight precision AC mains outlets, plus a high current input socket.

Power Box S3 Phono is a very efficient and flexible power filter for your turntable and phono preamp. By placing the power supply outside of the main component, potential noise and audio signal contamination is avoided. Clean energy contributes significantly to the sound quality.

The V5 Elektra brings IsoTek’s legendary multiple and individual power cleaning networks dedicated for each outlet to a new lower price class. V5 Elektra therefore has to be the most cost-effective power cleaning upgrade money could buy.

The V5 Gemini is the fully updated version of our compact award-winning EVO3 Polaris, featuring just two output sockets rated at 10A.

Your chance to enter IsoTek’s innovative and multi award-winning range of power line cleaning solutions. The new V5 Polaris offers nine times more Differential Mode filtering, improved amperage with decreased resistance along with a 60% improved Direct Current Resistance.

V5 Corvus is an evolution of IsoTek’s award winning Polaris design, reconfigured to feature nine output sockets. It is a cost effective upgrade to any audio or audio-visual system, delivering improved performance and protection as well as being great value for money. Corvus can be easily wall mounted behind your audio system.

The QSOURCE is a fanless Linear Power Supply designed specifically for hi-fi audio applications. By providing a stable, clean output of DC power at select voltages, while maintaining extremely low noise levels, the QSOURCE enhances the audio imagery of a sound system by improving sonic articulation, heightening dynamics, and expanding the sound stage.