GoldenEar Triton Three+ Floorstanding Speakers

The Goldenear Triton Three+ incorporates the same advanced technologies and delivers state-of-the-art performance remarkably similar to its bigger brothers. The Triton Three is literally a smaller version of the award-winning Triton Two. It is the perfect solution for listeners looking for a more compact loudspeaker that offers equally superb performance for both high-quality two-channel systems as well as in multi-channel home theater and music systems.

Like the Two+, the Triton Three+ incorporates the built-in powered subwoofer technology first pioneered by GoldenEar principals Sandy Gross and Don Givogue. In this case, there is an integral 800-Watt digital/DSP controlled power amp driving an active front-mounted long-throw 5˝ x 9˝ quadratic subwoofer driver. This is coupled to two opposing, inertially balanced 6.75˝ x 8˝ quadratic planar infrasonic passive radiators which are located on the sides, near the floor, in order to take full advantage of boundary coupling. There is one of the same 4.5˝ high-definition cast basket MVPP™ drivers as used in the Two, along with the same GoldenEar signature High Velocity Folded Ribbon (HVFR™) tweeter.

Performance-wise, the Triton Three+ delivers the same boxless three-dimensional imaging as the Triton Two+, which reviewers have hailed as “mystical,” “magical” — and, best summed up by the dramatic reviewer’s rave,“had us believing that the entire surface of the front wall was covered with speakers.” Likewise, the powerful, deep subwoofer bass blends perfectly with the silky smooth, utterly transparent midrange and high frequencies, putting many dramatically more expensive speakers to shame.

HIGH-VELOCITY FOLDED RIBBON TWEETER (HVFR)

Tweeter Diaphragm is a High Temperature Film

High-Power Neodymium Magnets

Squeezes/Pressurizes Air Instead of Pushing It

Greater Control, Smoother More Extended Response

Vanishingly Low Distortion

Dramatically Improved Dynamic Range and Detail

Superb Dispersion Characteristics

Superior Impedance Match to Air

4.5˝ HIGH-DEFINITION BASS/MIDRANGE DRIVER

GoldenEar Multi-Vaned Phase Plug (MVPP) Design

Rigid Free-Flow Cast-Basket Chassis

Proprietary Computer Optimized Cone Topology

High-Gauss Magnet Assembly

1˝ High-Temperature Kapton Former Voice Coil

Extremely Extended ResonantFree Linear Frequency Response Characteristics

5˝ X 9˝ QUADRATIC SUB-BASS DRIVER

Ultra-Long Throw

Glass Fiber and Nomex® Composite Cone

Huge, High-Gauss Magnet Assembly

1.5˝ High-Temperature Aluminum Voice-Coil

Quadratic Cone Topology for Maximum Cone Surface Optimization

QUADRATIC PLANAR INFRASONIC RADIATOR

Pressure-Coupled Loading Extends Usable Bass Performance to the Infrasonic Region

Performs Like a Well-Tuned Transmission Line but with Superior Transient Performance and Control

Specifications

2 x 7″ x10″ radiators

1 x 4 1/2″ MVPP mid/bass drivers

1 x HVFR Folded Ribbon Tweeter

Freq Response: 20 Hz – 35 kHz

Efficiency: 90 dB

Nominal Impedance: 8 Ohms

Recommended Amp: 20-400 Watts/channel

Built in 800 Watt Amp

Weight: 20.5 kg each

Dimensions: 17 cm x 33 cm x 111 cm