Vincent SP-T700 Mono Power Amplifier

The Best Of Two Worlds
Subtle reproduction of voice and acoustic instruments, plus the strength and punch of a huge rock stage, the SP-T700 is an exceptionally dynamic power amplifier that can meet such broad requirements with elegant ease. This is possible due to the latest tube technology, combined with a transistor end stage that operates in Class A mode. This enables high power delivery, inspiring sound, plus comprehensive speaker control.

The vacuum tubes in this amplifier were originally designed to military specifications, meaning they're incredibly durable and efficient, guaranteeing a minimum lifetime of 10,000 hours. Give your music the warm richness that only comes from valve amplification.

Vacuum tubes in hi-fi amplifiers are highly revered, and a sign of high manufacturing quality. Vincent takes their visual aesthetic just as seriously as the performance of their products. Because of this, Vincent has included a tube-viewing port on the front panel of their tubeLine products. With a switch on the back, you can switch the backlight on or off.

Calculated Design
SP-T700 is a mono power amplifier for one or two loudspeakers. With its hybrid construction of valves and transistors, the SP-T700 combines the advantages of both.

This amplifier is the result of advanced development work and a careful choice of components. What you get is a main amplifier that has little competition in terms of sound, and never loses control even under extreme loudspeaker demands.

High Power
The highly developed power supply has been through the same selective revision process as the rest of the components in the SP-T700. The state of the art vacuum tube circuit technology that debuted in this unit offers consistent and reliable power to make the high-demand performance possible. This high-end amp boasts high power reserves and handling levels to provide a solid foundation for your demanding usage needs.

Key Features
- Tube & Transistor amplification
- Stunningly True Sound Reproduction
- Superior Power Reserve.
- Output to 2 speakers Simultaneously

Features & specifications
Monoblock power amplifier
Hybrid vacuum tube and solid state circuitry
Designed by internationally acclaimed engineer and designer Frank Blöhbaum
Critical circuitry assembled and hand-tested in Germany
Highly linear driver stage
Direct-coupled design
Military-spec tubes designed for a minimum service life of 10,000 hours
Tubes: 1 x 6S3P-EV, 1 x 6SCH9P, 1 x 6Z4
Inputs: 1 x mono RCA, 1 x 3.5 mm Jack socket (Power Control)
Outputs: 2 x 2 Speaker terminals, 1 x 3.5 mm Jack socket (Power Control)
Finish: Black
Frequency response: 20Hz – 20kHz +/- 0.5dB
Nominal output power RMS / 4 Ohm: 300 Watt, RMS 8 Ohm: 150 Watt, Class A/8 Ohm: 10 Watt
Harmonic distortion: < 0.01 % (1 kHz, 1 Watt); <0.1% (1kHz, 25 Watt)
Input sensitivity: 1 Volt (for 25 Watt RMS at 4 Ohm)
Signal-noise ratio: > 90 dB
Input impedance: > 22 kOhm
Dimensions: 8.26" wide x 10.35" high x 15.7" deep
Weight: 35.2 lbs
Note: Two amplifiers required for stereo operation