Vincent SP-332 Stereo Power Amplifier

A hybrid power amplifier for a powerful end stage.
At first glance, the SP-332 is instantly recognizable. With extended use, it is obvious that this is a unique amp that stands on its own in terms of sound quality and performance.

Key Features
- An enhancement of the popular SP-331
- Hybrid tube & solid state amplification
- Twin VU meters measures loudness
- 2 x 150 Watt power output 8 Ohms
- Superior power reserves.
- 4 x high-quality speaker binding posts per channel
- Powerful, deep bass performance

A fantastic power amplifier improved.
The SP-332 is an enhancement of the hugely popular SP-331, which upgrades it with higher quality inputs at the rear and dual speaker outputs. The dual speaker outputs can be switched on and off individually with the switches at the front. This allows you to easily set up two pairs of loudspeakers, perhaps in two different rooms, to listen to. There are unbalanced RCA inputs on the rear, as well as balanced XLR inputs. This makes the SP-332 compatible with a huge range of preamplifiers. Select which input you're using with the switch on the back.

The best of two worlds
The SP-332, with its hybrid design, combines the advantages of both vacuum tube and transistor amplification. Valve amplification provides the classic warm tone that audio enthusiasts crave. Combined with transistor solid-state technology, the result is a power amp that is efficient in terms of power consumption, and in sound is timelessly rich. This is a main amplifier with little competition and one that never loses control when working with even the most demanding of loads.

Inside, two 6N16 tubes working in differential push-pull form the input stage, giving the sound signal its classic warmth and richness. In the transistor output stage, there are 8 large FET transistors available for the final amplification. These generate 150 watts per channel at 8 ohms - enough power to effortlessly drive even the most critical speakers.

A power amplifier that meets modern AV needs musty be powerful yet delicate. Capable of reproducing everything from airy voice and acoustic instruments, to the strength and punch of a huge musical piece.

Backed by plenty of power
In the power supply, a 500W toroidal transformer provides the power necessary for constant. Elcos with a capacity of 80,000 µF "buffer" them. Transferred to the sound creates a "dry", powerful and deep bass fundament. The stabilization of the voltage is handled by a 6N15 tube.

Looks as good as it sounds
At first glance immediately recognizable - the new VU meters on the front panel. The color backlight and the status LEDs can be switched between red, blue, green and white using a sliding switch on the back.

Minimalistic Design
With its hybrid construction of valves and transistors, the SP-332 has a lot going on under the hood. However, with your system's aesthetic in mind, the exterior of this unit is sleek and minimal.

A stereo preamplifier, such as Vincent's SA-32 is a perfect match for the SP-332. Combine this unit with the CD players, tuners and other components from their product range, you can build the most diverse, perfectly harmonious sound system.

Features & specifications

Frequency Response: 20 Hz - 20 kHz +/- 0.5 dB
Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt
Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt
Harmonic Distortion: < 0.1 % (1 kHz, 1 Watt)
Input Sensitivity: 1.35 Volt
Signal-Noise Ratio: > 91 dB
Input Impedance: 47 kOhm
Max. Power Consumption: 531 Watt
Inputs: 1 x Stereo RCA, 1 x Stereo XLR, 1 x 3.5 mm Jack (Power Control)
Outputs: 2 x 4 Speaker Terminal, 1 x 3.5 mm Jack (Power Control)
Tubes: 2 x 6N16, 1 x 6N15
Colour: Black
Weight: 21 kg
Dimensions (W x H x D): 430 x 165 x 430 mm