Velodyne SC-1250 Subwoofer Amplifier

"Bass cannot be located anyway!" Perhaps you have heard this claim somewhere before. In fact, there is a kernel of truth in the statement that the human ear has difficulty locating low frequencies. But this is only true for frequencies well below 80 Hz. This also means, however, that the subwoofer should not emit any frequencies above this limit, which most conventional subwoofers are unable to do.

Truly potent subwoofers that can reproduce the lowest frequencies without drifting unintentionally into the frequency spectrum above 80 Hz cannot be made arbitrarily small for physical reasons. The Velodyne SubContractor series now offers you all possibilities to integrate a powerful and clean low bass unobtrusively into your listening room.

Features

Easy to Install

Easy install in retro fit or new construction with integrated cabinet. Just cut, plug and play.

Low-Profile Design

The low-profile design virtually disappears, fitting flush in a standard 2x4 wall

System friendly features

12V trigger, IR repeater jack, RS-232 controllable (Crestron Certified)

Almost invisible but Powerful

Amazing deep, powerful, low distortion bass performance that integrates into the wall

Speifiations

SC-1250

Driver -

Amplifier Class D 

3000 watts dynamic

1250 watts RMS power

Frequency Response:   -

THD -

High Pass Crossover  80 Hz (6 dB / octave)

Low Pass Crossover  30 - 160 Hz, defeatable, 24 dB / octave slope

Phase  0°, 90°, 180°, 270°

Magnet Structure  -

Voice Coil  -

Input  Line and Speaker level

Output  Line-level, 80 Hz up, speaker level for up to two subwoofers

Dimensions (H/W/D) (includes feet, flange and/or knobs)  3.6" x 17" x 12.5" (9 x 43.2 x 31.8 cm)

Shipping Weight (approx) 30 lbs.