SVS SB-2000 Classic Sealed Subwoofer

The SVS SB-2000 achieves a staggering 19-240 Hz frequency response from a compact, sealed enclosure weighing only 35 lbs. and measuring 14.2-inches all-around (without feet and grille). The subwoofer’s weight, compact footprint and understated but elegant appearance make moving and blending it into any listening environment a cinch, without sacrificing any of the power and slam we expect from massive subwoofers. No small performer, the SB-2000 matches or beats the output levels of subwoofers twice its size and weight. An all-new driver and amplifier, sealed cabinet and revised tuning unleash the SB-2000 to achieve levels of articulation, musicality, dynamics and fathomless extension unequaled in other compact powered subwoofers.

COMMANDING 12-INCH SVS HIGH OUTPUT DRIVER

At the heart of the SVS SB-2000 subwoofer is a newly engineered 12-inch 2000-series driver with dual high-grade ferrite magnets and an FEA-optimised motor for nearly distortion-free performance, even at the most extreme drive levels. A reinforced Nomex spider was integrated for improved linearity and driver control, especially important when the STA-500D amp is pushing the driver to reference SPL playback levels. To ensure the SB-2000 can play its best long into the future, the driver also features a durable low-creep rubber long-throw surround and integrated tinsel leads to maximise longevity.

POWERFUL AND SOPHISTICATED SLEDGE STA-500D AMPLIFIER

The SB-2000 Subwoofer’s Sledge STA-500D DSP amplifier boasts specs and features normally found in subwoofers costing two or three times as much. Conservatively rated at 500 watts RMS and 1,100+ watts peak dynamic power, the amp also has brains to match its brawn. A sophisticated DSP in the amplifier includes an array of filters and volume, gain, and phase controls for fine-tuning performance. The innovations don’t stop there though. A frequency-dependent limiter/compressor algorithm with adjustable attack/release and compression parameters offers the ultimate in refined behaviour at the drive limits of the subwoofer system.

Specifications

FREQUENCY RESPONSE / ACOUSTIC DATA:

19-220 Hz +/- 3 dB

Expect 2-3 Hz deeper extension in small to mid-size rooms.

2-meter ground plane away from reflective structures (quasi-anechoic)

Roll-off slope optimised to take maximum advantage of available room gain

SUBWOOFER SPECS:

Premium black ash and piano black finish options

Protective non-resonant steel mesh grille

Front-firing 12" driver

Rear-mounted amplifier

Screw-in rubber feet

Robust Medium Density Fiberboard (MDF) cabinet construction

Cabinet Dimensions: 14.6" (H) x 14.2" (W) x 15.4" (D) (without grille)

Overall Dimensions: 14.6" (H) x 14.2" (W) x 17.1" (D) (with grille)

Weight (unboxed): 34.8 pounds

Shipped Dimensions: 21" (H) x 20.2" (W) x 23.2" (D)

Shipped Weight: 51 pounds

DRIVER SPECS:

SVS 12” 2000-series driver

Powder-coated cast aluminum basket

Dual high-grade ferrite magnets

Finite Element Analysis (FEA)-optimized motor structure

Dual shorting rings reduce gap induction and lower distortion

Extended pole piece improves heat sink and thermal management properties

2” diameter, high-power voice coil

Upgraded Nomex spider for improved linearity and driver control at extreme drive levels

High-quality insulated tinsel leads with 3-point-contact precision alignment

Lightweight aluminium cone with polypropylene dust cap provides excellent rigidity and pistonic behaviour

Low-creep rubber long-throw surround for excellent durability and longevity

AMPLIFIER SPECS:

Sledge STA-500D DSP amplifier

500 watts RMS continuous (1100 watts peak dynamic)

Efficient and cool-running Class D topology

DSP control for accurate response and refined behaviour under all operating conditions

Main power rocker switch

Auto-On / On toggle switch

3-12V trigger with 1/8” (3.5 mm) TRS mini-jack input

Green standby mode with > 0.5 watts consumption

Stereo line-level RCA Input & Output connections

Input impedance – 47 kΩ (unbalanced line-level RCA)

Continuously variable volume/gain control

Continuously variable (0-180 degrees) phase control

Continuously variable (50-160 Hz) 12 dB/octave low pass filter frequency with disable/LFE setting

Fixed 80 Hz 12 dB/octave high pass filter on line level outputs

RoHS compliant, lead-free construction and world-wide safety certifications

Detachable power cord