Pro-Ject The Classic Evo Turntable (Ex Demo)

Ex Demo, No Cartridge included.

Compared to the old Classic, we improved the subchassis; we tried to make it heavier and stiffer to reduce resonances. Isolating the platter and tonearm from the resonances of the motor and main plinth is the target.

Platter & sub-platter
The heavy aluminium main platter construction utilises advanced thermo plastic elastomers (TPE*) for optimising resonance behaviour.

A drawback for most of the old designs was the platter. Casted platters all have been heavy (which is good for speed constancy and low wow and flutter) but suffered very much from ringing effects which again caused colouration of the sound. The platter of The Classic Evo is precisely machined out of a special aluminium alloy again damped with TPE*, which offers special damping abilities. The main bearing construction we use is a similar system as the one on the Vienna Philharmonic Recordplayer.

The diamond cut precision alu sub-platter, like in the limited edition Vienna Philharmonic Recordplayer, enables much improved tolerances. This extraordinarily sophisticated part is accurately machined and guarantees a very good isolation between bearing noise and the platter itself.

New carbon/aluminium tonearm
The radical new designed Classic tonearm is the result of 25 years of experience in mechanical construction. The tonearm tube is made out of a sandwich of carbon and aluminium: carbon for stiffness and speed, alu for better damping. The bearing has been upgraded to the same type that is used on our Pro-Ject CC EVO tonearms. It facilitates frictionless vertical and horizontal movement, guaranteeing precise tracking across the entire duration of the record. The counterweight incorporates a TPE* damper which allows us to reduce the amplitude of the tonearm cartridge resonance frequency by 50%.

As typical for Pro-Ject and absolutely not standard at that price range we offer also azimuth and VTA adjustment to use a variety of cartridges.

Features
Diamond cut precision aluminium sub-platter
Improved sandwich subchassis
Electronic speed control (33/45 rpm)
Belt drive
Height adjustable decoupling feet
Precision balanced TPE*-damped aluminium-platter
Metal/MDF sandwich chassis floating on TPE* suspension
9” Carbon/aluminium tonearm with MM & MC capability
Inverted EVO bearing design with four ABEC7 spec ballraces
Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances
Azimuth and VTA fully adjustable
TPE damped counterweight
Classic wooden chassis in 2 satin finishes (Walnut or Eucalyptus)
Dustcover included

Specifications
Speed 33, 45, 78 (electronic speed change)
Drive principle belt drive
Platter 300 mm aluminium
Mains bearing stainless steel
Wow & flutter 33: ±0.10 % 45: ±0.09 %
Speed variance 33: ±0.13 % 45: ±0.10 %
Signal to noise 70dB
Tonearm 9” carbon/aluminium sandwich tonearm
Effective arm length 230 mm
Effective arm mass 13.5 g
Overhang 18 mm
Tracking force 10 - 30mN
Included accessories 15 volts DC / 0.8A power supply, dust cover
Power connection 110/120 or 230/240 Volt - 50 or 60 Hz
Power consumption 5 watt max / < 0.5 watt standby
Dimensions 462 x 131 x 351 mm (WxHxD) lid closed
Weight 10.5 kg net